RAYMAN spol. s r. o.
Ocelárenská 1781
272 01 Kladno
tel: +420 312 685 978
info@rayman.cz

IČ: 47549122
DIČ: CZ 47549122
Firma je zapsána v obchodním rejstříku vedeném Městským soudem v Praze, oddíl C, vložka 21117.

Linkedin

  EQUIPMENT FOR DISPLACING DUSTING „FLUIDCOLL“
For displacing dusting from filters and precipitators it is possible to take use of equipment FLUIDCOLL that combines a collecting conveyance using FLUID CONVEYORS and a long-distance conveyance using a FLOW-FEEDER.
 

 

  RK 12 0636 Plate gate
It is used as pressure gate of mechanical and electrostatic precipitators hoppers and filter hoppers.
 

 

  RK 12 0637 Plate gate
It is used as pressure gate of mechanical and electrostatic precipitators hoppers and filter hoppers.
 

 

  RK 12 0638 Safety device PU 310 A
It is determined for securing silos and hoppers of excessive over�or underpressure.
 

 

  RK 12 0639 Diverter
It is determined to divert conveying pipelines to two lines and to close one of them.
 

 

  RK 12 0640 Conveying pipeline closure
It is determined to close conveying pipeline behind a pneumatic conveying feeder or at the end of conveying pipeline.
 

 

  RK 12 0643 BLOW-IN MATERIAL CLOSURE PMU
A blow-in material closure is determined to close conveying pipeline and to add conveying air to the pipeline of pneumatic conveying systems of bulk materials. These pneumatic conveying systems take advantage of vessel conveyors, flow or screw or any other feeders.
 

 

  RK 12 0650 Conveying pipeline knee
It is determined to change a conveying pipeline direction. It is designed as antiabrasive knee.
 

 

  RK 12 1051 Bin Z3
It is determined for holding of loose, dry powder and fine grain materials.
 

 

  RK 12 1070 Filter for manometer connecting DN1 1/4"
It is determined for manometers connected to conveying pipelines. It saves their mechanism of dust.
 

 

  RK 12 1071 Aerating needle DN 2
It is determined for local aerating of loose, dry and non-agglomerating powder and fine grain materials and pneumatic releasing of arches of this materials.
 

 

  RK 12 1074 Pulse needle
It is determined for local releasing of arches of loose, dry and non-agglomerating powder and fine grain materials using pressure air pulses, especially in hoppers of separators, filters and silos.
 

 

  RK 12 1075 Sampler
It is determined for bulk materials samples taking from chutes, outlet heads of airslides, filling spouts etc.
 

 

  RK 12 1350 Middle pressure through-flow feeder
It is determined for pneumatic conveyment of loose powder and fine grain materials of temperature of 120 �C resp. 200 �C by pressure air to 200 kPa for conveying outputs to hundreds of metres with tens metres rise.
 

 

  RK 12 1351 Middle pressure through-flow feeder
It is determined for pneumatic conveying of loose powder and fine grain materials of temperature of 120 �C resp. 200 �C by pressure air to 70 kPa for conveying outputs to hundreds of metres with tens metres rise.
 

 

  RK 12 1355 VENTURI (EJECTOR) FEEDER EP
Venturi feeder is determined to pneumatic conveying of dry and loose powder and fine grain materials. Feeder feeds material continually under pressure of conveying air (gas) to pneumatic conveyingpipeline.
 

 

  RK 12 1401 Middle pressure vessel conveyor SKP 230-R
It is determined for pneumatic conveying of loose powder and fine grain materials of temperature of 120 �C resp. 200 �C by pressure air to 70 kPa for low and very low conveying outputs and low distances and rises.
 

 

  RK 12 1411 Vessel conveyor PKRH 1
It is determined for pneumatic conveying of loose powder and fine grain materials by pressure air to 600 kPa for higher conveying outputs and long distances and elevations. Vessels volumes are 1; 3,15 and 7,8 m3.
 

 

  RK 12 1522 Pneumatic conveying slides
They are determined for pneumatic conveying of loose, dry, non-agglomerating powder and fine grain materials (par example cement, milled limestone, fly ash, powders of PVC, etc.).
 

 

  RK 12 1530 Aerating pads
They are determined for aerating of loose, dry, non-agglomerating powder and fine grain materials and their fluidisation.
 

 

  RK 12 1532 Aerating pad
It is determined for aerating of loose, dry, non-agglomerating powder and fine grain materials and their fluidisation.
 

 

  RK 12 1533 Fluid conveyor FD
It is determined for horizontal pneumatic conveying of loose, dry, non-agglomerating powder and fine grain materials of temperature to 120 �C resp. 200 �C, with inclination 6% by compressed air to 200 kPa, for conveying outputs to hundreds of t per hour and distances to tens metres.
 

 

  RK 12 1534 Fluid conveyor FD-segregation chamber
It is determined for horizontal pneumatic conveying of loose, dry, non-agglomerating powder and fine grain materials of temperature to 120 �C resp. 200 �C, with inclination by design, by compressed air to 40 kPa, for conveying outputs to hundreds of t per hour and distances to tens metres.
 

 

  RK 12 1535 Aerating pad
It is determined for aerating of loose, dry, non-agglomerating powder and fine grain materials and their fluidisation.
 

 

  RK 12 1537 DUSTING TRAP OD from filter hoppers and precipitators
Dusting trap is determined to displace dust captured in canal hoppers of filters or precipitators to coherent conveying or storage equipment. It is convenient also for highly abrasive dusts. Dusting trap operates continuously or cyclically, when is put into operation after creating enough amount of dust in hopper. Outlet collar of trap could be located according to needs in its middle or at one of its edges.
 

 

  RK 12 1551 Pneumatic discharger PV
It is used for discharge and hand-operated regulation of flow of fluidised, loose, dry, non-agglomerating powder and fine grain materials of temperature to 120 �C resp. 200 �C by compressed air of pressure from 40 to 600 kPa from silos, bins, fluid conveyors and others devices equipped by aerating devices.
 

 

  RK 12 1552 A REGULATING PNEUMATIC DISCHARGER RV
A regulating pneumatic discharger is determined to discharge and automatic adjustment flow of aerated dry bulk powder or slightly granulated materials, its temperature is till 100 °C (or till 150 °C). Discharger is possible to install either separately to discharge materiál from fluid conveyors or side extraction from hoppers and silos provided with aerating system or to another outlet or segregation chambers.
 

 

  RK 12 4251 Material separator 400x4
It is determined for material separation of conveying air stream.
 

 

  RK 12 4253 Material separator 630
It is determined for material separation of conveying air stream.
 

 

  RK 12 4254 Expander 1200
It is determined for directing of material from conveying pipeline to bin or material separation of conveying air stream.
 

 

  RK 12 4255 Terminal box
It is determined for directing of material from conveying pipeline to a bin or material separation of conveying air stream. It is used as a terminal box at the end of pneumatic conveying pipeline.
 

 

  RK 12 5180 Filter FH
It is determined for dust particles separation from the air stream outgoing from pneumatic conveying systems, expedition equipments etc. There are used filter cartridges with pressure air regeneration (JET system) as a filtering medium. The filter is delivered with filtering area from 6 m2 till 50 m2. It can be delivered with an integral exhaust fan.
 

 

  SEGREGATING CHAMBER SKZ
Segregating chamber serves to separate heavy adulterants (lumps, heavy particles, stones, rests of grinding balls etc.) from bulk materials, as cement, fly ash, milled lime, limestone, slag, gypsum etc. It is determined above all to install into air slides or square fluid conveyors.